Sample network configuration file
<?xml version="1.0" encoding="utf-8"?>
<!--This XML file has been generated by the Network Configuration Tool after successful application of user
settings-->
<!--Created - 10 Wed Dec 2014 04:50-->
<NetworkConfigurationTool>
<SystemSerialNumber-2M23330589>
<Interfaces>
<Interface ifIndex="16">
<Name>Ethernet 41</Name>
<Description>HP Ethernet 1Gb 4-port 331FLR Adapter #4</Description>
<IsMediaConnected>false</IsMediaConnected>
<IsNetEnabled>false</IsNetEnabled>
<AdapterHWInformation>
<BindingOrder>0</BindingOrder>
<Bus>3</Bus>
<Device>0</Device>
<Function>3</Function>
<InstanceID>{DABD5F10-C2A9-40ED-9701-F4EEE1FE6B60}</InstanceID>
<PciKey>3:0:3</PciKey>
</AdapterHWInformation>
<AdapterIPConfiguration>
<DefaultGateway>16.78.88.1</DefaultGateway>
<DHCPEnabled>false</DHCPEnabled>
<IPAddress>16.78.88.20</IPAddress>
<PrimaryDNS></PrimaryDNS>
<SecondaryDNS></SecondaryDNS>
<TertiaryDNS></TertiaryDNS>
<StaticEnabled>true</StaticEnabled>
<SubnetMask>255.255.248.0</SubnetMask>
<IsDHCPDNS>false</IsDHCPDNS>
<IsDHCPIP>false</IsDHCPIP>
<IsStaticDNS>true</IsStaticDNS>
<IsStaticIP>true</IsStaticIP>
</AdapterIPConfiguration>
<DNSDomainName></DNSDomainName>
<IsAvailableforTeam>true</IsAvailableforTeam>
<IsMemberofTeam>false</IsMemberofTeam>
<IsLocal>true</IsLocal
<IsVirtualLAN>false</IsVirtualLAN>
</Interface>
<Teams>
<Team>
<Name>Team1</Name>
<TeamingMode>SwitchIndependent</TeamingMode>
<LoadBalancingAlgorithm>Dynamic</LoadBalancingAlgorithm>
<TeamStatus>Down</TeamStatus>
<IsLocal>false</IsLocal>
<VLANforTeam>
<DefaultVLAN></DefaultVLAN>
<DiscreteVLAN/>
<SingleVLAN>45</SingleVLAN>
<StepVLANRange></StepVLANRange>
<IsProperStep>true</IsProperStep>
<RangeVLAN/>
<UpperRangeLimit></UpperRangeLimit>
<LowerRangeLimit></LowerRangeLimit>
<VLANType>SingleVLAN</VLANType>
<VLANIDs>
<VLANID>45</VLANID>
</VLANIDs>
<CanMoveForward>true</CanMoveForward>
</VLANforTeam>
<TeamMembers>
<TeamMember>Ethernet 3</TeamMember>
</TeamMembers>
</Team>
</Teams>
</SystemSerialNumber-2M23330589>
</NetworkConfigurationTool>
In the NCTConfig.xml file, you can edit only the following tags:
• <Name>—Contains the physical network interface name.
• <AdapterHWInformation>—Contains the hardware information of the physical network
interface. You can edit all subtags within this tag, such as <BindingOrder>, <Bus>,
<Device>, and so on. However, you cannot edit the <PciKey> tag.
• <AdapterIPConfiguration>—Contains the IP configuration of the network interface.
You can edit all subtags within this tag, such as <DefaultGateway>, <DHCPEnabled>,
<IPAddress>, and so on.
Using the Network Configuration Tool 63
To Next Page
Loading...
