HP Storevirtual 4000 - Shared Versus Individual Characteristics

Figure 71 Rename SmartClone volume from base name
1. Rename SmartClone volume in list
Shared versus individual characteristics
Characteristics for SmartClone volumes are the same as for regular volumes. However, certain
characteristics are shared among all the SmartClone volumes and snapshots created from a common
clone point. If you want to change one of these shared characteristics for one SmartClone volume,
that change will apply to all related volumes and snapshots, including the original volume and
snapshot from which you created the SmartClone volumes. Simply use Edit Volume on the selected
volume, and make the change to the volume. A message opens, stating that the change will apply
to all of the related volumes, which are noted in the message.
For example, in Figure 72 (page 184), in the cluster Programming, there are 10 SmartClone volumes
created from one source volume and its clone point. You want to move the first of the SmartClone
volumes, to the cluster SysAdm2.
Shared versus individual characteristics 183