HP Storevirtual 4000 User Manual

22 SAN/iQ TCP and UDP port usage
Table 77 (page 255) lists the TCP and UDP ports that enable communication with SAN/iQ. The
“management applications” listed in the Description column include the HP LeftHand Centralized
Management Consoleand the scripting interface.
Table 77 TCP/UDP ports used for normal SAN operations with SAN/iQ
DescriptionNamePort(s)IP Protocol
Secure Shell access for
SAN/iQ Support only. Not
SSH22TCP
required for normal
day-to-day operations.
Outgoing from storage
systems for email based
alerts.
SMTP25TCP
Outgoing from storage
systems for hostname
resolution.
DNS53TCP, UDP
Used only if DHCP is
enabled.
bootps67, 68TCP, UDP
Outgoing from storage
systems for time
synchronization.
NTP123UDP
SNMP Agent on the storage
system. Incoming from
SNMP161, 162UDP
SNMP clients. Outgoing
from the storage systems for
SNMP Traps.
Outgoing from the storage
systems for remote logging.
Syslog514UDP
Outgoing from the storage
systems for iSNS services
iSNS3205TCP, UDP
iSCSI initiators connect on
this port.
iSCSI3260TCP
Used for internal SAN/iQ
discovery.
SAN/iQ Internal8453, 8454, 8455UDP
Incoming to storage systems.
Used for upgrading the
SAN/iQ Upgrade11120TCP
storage systems. Not
required for normal
day-to-day operations.
Outgoing from management
applications. Incoming to
SAN/iQ Internal13838, 13841, 13843TCP, UDP
storage systems. Used for
management and control.
Outgoing from management
applications. Incoming to
SAN/iQ Internal13840, 13850, 13851TCP
storage systems. Used for
management and control.
Trace Ports for SAN/iQ
Support only. Not required
SAN/iQ Support13846, 13850, 13946,
13847
TCP
for normal day-to-day
operations.
255

HP Storevirtual 4000 Specifications

General

Brand	HP
Model	Storevirtual 4000
Category	Storage
Language	English