2 Working with storage systems
Storage systems displayed in the navigation window have a tree structure of configuration categories
under them, as shown in Figure 3 (page 21). The configuration categories provide access to the
configuration tasks for individual storage systems. You must configure each storage system
individually before using it in a cluster.
Figure 3 Storage system configuration categories
The configuration categories include the following:
• Diagnostics—Run hardware diagnostic tests, view current hardware status and configuration
information, and save log files.
• Network—For each storage system, configure and manage the network settings, including
network interface cards (NICs), the routing table, and which interface carries SAN/iQ
communications.
• Storage—Manage RAID and the individual disks in the storage system.
Identifying the storage system hardware
Each HP LeftHand storage system is based on a specific HP platform. For general information about
the underlying hardware of your HP LeftHand Storage model, such as LEDs, component identification,
and replacing components, see the platform-specific documentation. Table 4 (page 21) identifies
the HP platform used for each LeftHand model and a link to related information.
Table 4 HP platform identification
LinkDocumentationHP platformHP LeftHand model
http://www.hp.com/support/DL320s_UG_enHP ProLiant DL320s User
Guide
ProLiant
DL320s
NSM 2120
http://www.hp.com/support/
DL185Gen5_MSG_en
HP ProLiant DL185
Generation 5 Maintenance
and Service Guide
ProLiant
DL185 G5
HP LeftHand P4300
HP LeftHand P4500
Contact HP Support for more information as this
guide is not publicly available.
HP SE1220 Maintenance and
Service Guide
SE1220HP P4300 G2
HP P4500 G2
HP P4900 G2
http://www.hp.com/support/
HP_P4800_G2_SAN_Solution_BladeSystem_MG_en
HP P4800 G2 SAN Solution
for BladeSystem Maintenance
Guide
ProLiant
BL460c G7
P4800 G2
Identifying the storage system hardware 21
To Next Page
Loading...
