HP Storevirtual 4000 - Managing Disks; Getting There; Reading the Disk Report on the Disk Setup Tab

Managing disks
Use the Disk Setup tab to monitor disk information and perform disk management tasks as listed
in Table 9 (page 35).
Table 9 Disk management tasks for storage systems
Where availableDisk setup function
All storage systemsMonitor disk information
Storage systems running version 9.5.01 or laterView Disk Details
Storage systems with this specific capabilityActivate Drive ID LEDs
Getting there
1. In the navigation window, select a storage system.
2. Select the Storage category in the tree below it.
3. Click the Disk Setup tab.
Reading the disk report on the Disk Setup tab
The Disk Setup tab provides a status report of the individual disks in a storage system.
Figure 10 (page 35) shows the Disk Setup tab and Table 10 (page 36) describes the corresponding
disk report.
Figure 10 Example of columns in the Disk Setup tab
Managing disks 35