11. Attach the wall-mounting hardware (purchased separately) to the VESA adapter plate, according
to the manufacturer's instructions, using either the 100 mm x 100 mm screw holes or the 100
mm x 200 mm screw holes.
Figure 7-12 100 mm x 100 mm holes
Figure 7-13 100 mm x 200 mm holes
NOTE: The computer can be mounted in either landscape or portrait orientation. If mounted in
portrait orientation make sure the CD/DVD drive is at the top. For landscape orientation, keep
the same orientation as when the computer is on the stand.
44 Chapter 7 Removal and Replacement Procedures
To Next Page
Loading...
