HP Z Workstation series User Manual

3 Setting up the workstation
This chapter describes how to set up the workstation, and includes these topics:
Topics
Ensuring proper ventilation on page 19
Setup procedures on page 20
Converting to desktop configuration (Z400 only)
on page 22
Adding monitors on page 24
Accessibility on page 30
Security on page 30
Product recycling on page 30
Ensuring proper ventilation
Proper ventilation for the system is important for workstation operation. Follow these guidelines to
ensure adequate ventilation:
●
Operate the workstation on a sturdy, level surface.
●
Place the workstation in an area with adequate ventilation. Provide at least 15.24 CM (6 inches)
of clearance at the front and back of the workstation as shown in the following figure.
Your workstation might look different than the one shown.
Figure 3-1 Proper workstation ventilation
ENWW Ensuring proper ventilation 19

HP Z Workstation series Specifications

General

Processor Options	Intel Xeon
Graphics Options	NVIDIA Quadro, AMD Radeon Pro
Storage Options	SSD, HDD, NVMe
Operating System	Windows 10 Pro, Windows 11 Pro, Linux
Expansion Slots	Multiple PCIe slots
Ports	USB Type-A, USB Type-C, DisplayPort, audio
Networking	Gigabit Ethernet, Wi-Fi
Form Factor	Tower
Chipset	Intel C422
Power Supply	Various wattages depending on configuration