SubtopicsSubtopics
Installing a universal media bay in the SFF chassisInstalling a universal media bay in the SFF chassis
Installing a universal media bay in the LFF chassisInstalling a universal media bay in the LFF chassis
Installing the optical disc drive in the SFF universal media bayInstalling the optical disc drive in the SFF universal media bay
Installing the optical disc drive in the LFF universal media bayInstalling the optical disc drive in the LFF universal media bay
Installing a universal media bay in the SFF chassisInstalling a universal media bay in the SFF chassis
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have the following items available:
The components included with the hardware option kit
T-10 Torx screwdriver
ProcedureProcedure
1. Power down the server .
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove the air baffle .
6. Remove the fan cage.
7. Remove the bay blank.
To Next Page
Loading...
