HPE StoreOnce 3640

1
2
Item SAS cable Label color Cable from To
1 1 m Red Node Slot 3 Port 1 JBOD 1 IOM 1 Port 1
2 2 m Green Node Slot 3 Port 2 JBOD 1 IOM 2 Port 1
10. Connect two power cables to each enclosure. Connect each power cable to a different PDU.
11. Connect the server.
a. Connect the power cables.
Connect each power cable to a separate PDU in the rack.
b. Connect a network cable to LAN port 1.
c. Connect a network cable to the iLO port (recommended).
d. Connect a VGA monitor and a USB keyboard for initial configuration.
12. Attach the security bezel to the front of the server.
a. Insert the security bezel right tab into the slot on the chassis and then rotate the bezel to close.
HPE StoreOnce 5200 System 45