Volume creation will take up to 5 minutes to complete and during this time, no other actions on the
Storage Configuration tab will be available. RAID parity initialization will now start for the newly
added storage which will take several hours to complete. When the parity initialization process
completes, the storage expansion status will change to OK – Available for Expansion.
NOTE:
You can choose to wait until parity initialization is complete (recommended) or expand the file
system without waiting.
d. Click the Expand File System button at the top of the page.
If you expanded the file system before parity initialization is complete, a warning dialog box will
appear that says:
46 Applying the License and Completing the RAID Expansion
To Next Page
Loading...
