Safety
HTC 1500 ixT
8 3.0
Note!
Only original tools and spare parts from HTC may be used for the
machine. If not, neither the CE marking nor the warranty will be
valid.
Note!
For the CE marking to be valid, the instructions in this manual
must be followed.
Note!
The machine must only be lifted using the intended lifting eye.
Note!
The machine should be stored in a dry, warm (plus degrees)
location when not in use.
Note!
If the machine is stored in a cold (minus degrees) location, it must
be placed in a warm (plus degrees) location for at least two hours
before use.
Note!
After removing glue and wet grinding, always lift up the grinding
heads so that they do not stick to the floor and damage machine
components and the floor when restarting.
Note!
Check the bar each time you lift to avoid the grinding head being
damaged or causing injury or damage.
To Next Page
Loading...
