HTC 1500 ixT
Operation
3.0 33
4.12. Mist Cooler System
• The water is refilled via the tank cap in the water tank,
see Figure 3-1 on page 11.
• Start the system, see Figure 3-4 on page 15.
• Empty the water tank by turning the tap, see Figure
4-7 on page 33.
Figure 4-7 Tap for empting the water tank
4.13. Operation
The machine's functions are operated using the controls on
the control panels, see Figure 3-3 on page 13 and Figure
3-4 on page 15.
4.13.1. Main switch
The machine is equipped with a red main switch on the
right between the chassis and the dust separator, see Figure
4-8 on page 34. It must always be pulled out at the end
of the working day and when replacing tools and carrying out
maintenance on the machine.
• Push the main switch into its socket before starting the
machine.
To Next Page
Loading...
