Warranty and CE Marking
HTC 1500 ixT
50 3.0
10. Warranty and CE Marking
10.1. Warranty
This warranty only covers manufacturing defects. HTC bears
no responsibility for damage that arises or occurs during
transportation, unpacking or use. In no case and under no
circumstances shall the manufacturer be held responsible for
damage and defects caused by incorrect use, corrosion or use over
and above the prescribed specifications. The manufacturer is not
responsible for indirect damage or costs under any circumstances.
For complete information on the manufacturer's warranty period,
see HTC's current warranty terms.
Local distributors may have special warranty conditions specified
in their terms of sale, delivery and warranty. If you are unsure
regarding warranty terms, please contact your retailer.
10.2. CE marking
CE marking of a product guarantees its free movement within
the EU area in accordance with EU regulations. CE marking also
guarantees that the product fulfils various directives (the EMC
Directive and other possible requirements in so-called directives
for new procedures) in accordance with these regulations. This
machine carries the CE mark in accordance with the Low Voltage
Directive (LVD), the Machinery Directive and the EMC Directive.
The EMC Directive states that electronic equipment must not
disturb its surroundings with electromagnetic radiation and that
it must also be immune to electromagnetic interference in the
surroundings.
This machine is classified for use in environments such as heavy
industry, light industry and homes. See the Manufacturer’s
Declaration of Conformity, which shows that the machine is
harmonised with the EMC Directive.
To Previous Page
Loading...
