Operation
HTC 1500 ixT
20 3.0
4. Operation
4.1. General information
The following section describes how to change tools and how to
operate the grinder. This section does not deal with the technical
aspects of grinding, such as selection of grinding tools, etc. For
choice of tools, see HTC’s Product Catalogue under the Grinding
Guide tab.
Warning!
The machine may only be used or repaired by personnel who have
received the requisite theoretical and practical training and who
have read the user manual.
Warning!
Never use the machine in an environment with the risk of
explosion or fire. Familiarise yourself with the fire-protection
instructions for the working area and follow them.
Warning!
Secure the area around the working area. No unauthorised
persons should be allowed within a 15-metre radius of the
machine. If a loose object were to catch under the grinding head,
this could be flung out and cause personal injury.
Warning!
Use protective equipment such as shoes with steel toecaps, safety
goggles, protective gloves, protective mask and ear protectors.
Warning!
The machine must only be started with the grinding head down.
The rotating disc must be touching the floor and the correct tool
must be fitted.
To Next Page
Loading...
