Phone Calls and Voicemail 92
4. Follow screen instructions to make the call.
Call Using a Speed Dial Number
Speed dial numbers let you dial numbers by touching and holding a single number on the Phone keypad.
1. Tap > to display the phone dialer’s screen.
2. Touch and hold the speed dial key on the Phone keypad. The display confirms that you have
dialed the number when it shows "Dialing" on the upper right side of the screen.
Set Up Speed Dial
Your phone can store up to eight phone numbers in speed dial locations. (The number 1 is reserved for
Sprint voicemail access.)
To assign a speed dial number to a contact:
1. Tap > > People, and then tap a contact.
2. Tap > Set speed dial.
3. Tap Not assigned under Number to select the contact’s number that you want to assign to the
speed dial key.
4. Tap Not assigned under Location and then select a speed dial location.
5. Tap Save.
Note: If you assign a number to an already assigned speed dial location, the new phone number will
automatically replace the previous speed dial assignment.
Call Emergency Numbers
You can place calls to 9-1-1 even if the phone’s screen is locked or your account is restricted.
Important: You won’t be able to make an emergency call if you don’t have a network signal.
1. Unlock the screen. For more information, see Lock and Unlock Your Screen.
2. Tap > .
3. Tap .
As long as you are in an area covered by wireless service, the emergency call is placed.
Note: When your account is restricted or if you’ve enabled but forgotten your lock password or lock
pattern, you can still make emergency calls by tapping Emergency on the screen.
To Next Page
Loading...
