Basic Operations 57
Fingerprint Scanner
You can quickly wake up and unlock the phone using your fingerprint. You can add up to 5 fingerprints.
When setting up and using the fingerprint scanner, follow these tips:
● Make sure your finger and the fingerprint scanner are dry and clean.
● Use the entire pad of your finger, including the sides and tip.
● When recording your fingerprint, touch the scanner until it vibrates.
● The fingerprint scanner has 360° readability—you can touch a recorded finger at any angle to the
scanner to turn on the screen or unlock the phone.
Note: You may not be able to set the fingerprint scanner to unlock the phone, if you’ve signed in to an
Exchange ActiveSync account that requires you to set a different screen lock option (such as password).
Check with your Exchange Server administrator if your Exchange ActiveSync account supports the
fingerprint scanner.
Add a Fingerprint the First Time
It’s quick and easy to add a fingerprint.
1. Tap > > Settings > Fingerprint scanner.
2. Tap Add fingerprint.
If you haven’t already set up a lock screen pattern, PIN, or password, you’ll be asked to set
one up.
3. Tap Start.
4. Choose which finger or thumb to use, touch the scanner until it vibrates, then lift your finger or
thumb.
5. Repeatedly touch the scanner until the fingerprint has been successfully recorded. You’ll get the
best results if you hold your finger in the same direction when touching the scanner.
To Next Page
Loading...
