Set Up Your Phone 15
Slot with Card Tray
When inserting the eject tool into the tray eject hole to remove the card tray, do not obstruct the tray
to avoid damaging the eject mechanism inside the slot.
Insert SIM Card
The nano SIM card is preinstalled in your HTC U11. If you need to remove or replace the card, refer to
the following instructions.
1. Hold the phone face up.
2. Insert the tip of the tray eject tool (included in the box) into the tray eject hole.
3. Push the tip all the way into the hole until the tray ejects, and then pull the tray out.
4. With your nano SIM card's gold contacts facing down, place the card into the SIM holder of the
tray. Make sure to align the cutoff corner to the notch on the holder.
To Next Page
Loading...
