Phone Calls and Voicemail 100
3. Once you have established the connection, tap Add, and dial the second number. (This puts the
first caller on hold and dials the second number.)
Tip: You can add a call even if the first call was an incoming call.
4. When you’re connected to the second party, tap .
If one of the people you called hangs up during your call, you and the remaining caller stay connected. If
you initiated the call and are the first to hang up, all callers are disconnected.
■ To end the three-way call, tap End call.
Caller ID Blocking
Caller ID identifies a caller before you answer the phone by displaying the number of the incoming call. If
you do not want your number displayed when you make a call, follow these steps.
1. Tap > .
2. Tap .
3. Enter a phone number.
4. Tap Call.
To permanently block your number, call Sprint Customer Service.
Call Waiting
When you’re on a call, Call Waiting alerts you to incoming calls by sounding two beeps. Your phone’s
screen informs you that another call is coming in and displays the caller’s phone number (if it is available
and you are in digital mode).
To respond to an incoming call while you’re on a call:
1. Tap Answer.
This puts the first caller on hold and answers the second call.
2. To switch back to the first caller, tap the contact on the screen.
Note: For those calls where you don’t want to be interrupted, you can temporarily disable Call Waiting by
tapping before placing your call. Call Waiting is automatically reactivated once you end
the call.
Call Forwarding
Call Forwarding lets you forward all your incoming calls to another phone number – even when your
phone is turned off. You can continue to make calls from your phone when you have activated Call
Forwarding.
Note: Depending on your plan, you may be charged a higher rate for calls you have forwarded.
To Next Page
Loading...
