Camera and Video 173
4. Move the left and right sliders to divide your video into sections.
5. Tap a section that you want to adjust, and then tap a dot that corresponds to particular playback
speed to modify the selected section.
6. Repeat the previous step for the remaining sections.
7. Tap .
The edited video is saved as a copy. The original video remains unedited.
To add a Hyperlapse effect on a regular video:
1. Tap > > Photos.
2. Find and tap the thumbnail of a video to view it in full screen.
Note: You cannot add a Hyperlapse effect on a video that was captured using hi-res audio. See Record
Video in 3D Audio or High Resolution Audio.
3. Tap > Edit in > Zoe Video Editor.
4. Tap Create a Hyperlapse video.
5. Move the left and right sliders to divide your video into sections.
6. Tap a section that you want to adjust, and then tap a dot that corresponds to particular playback
speed to modify the selected section.
7. Repeat the previous step for the remaining sections.
8. Tap .
The edited video is saved as a copy. The original video remains unedited.
To Next Page
Loading...
