Set Up Your Phone 18
2. Insert the tip of the tray eject tool (included in the box) into the tray eject hole.
3. Push the tip all the way into the hole until the tray ejects, and then pull the tray out.
4. Place your microSD card—gold contacts facing down and narrow side facing in—into the
microSD holder of the tray.
5. When reinserting the tray, make sure it is facing up so that the nano SIM and microSD cards
don’t fall out. Hold the tray with the outer card holder between your fingers, and then steadily slide
the tray all the way into the slot.
To Next Page
Loading...
