3. Click Apply to apply the configuration.
Step 3 Configure parameters of the SIP-based voice users.
1. In the navigation tree, choose Voice > VoIP User Configuration.
2. In the right pane, configure parameters of voice user 1 as follows:
l Register User Name: 80001234
l Auth User Name: 80001234@softx3000.huawei.com
l Password: iadtest1
l Associated POTS: 1 (binding port TEL1 on the ONT)
l Select Enable to enable the voice user configuration.
3. Click Apply to apply the configuration.
4. In the right pane, click New to add voice user 2, and configure parameters of voice user 2
as follows:
l Register User Name: 80001235
l Auth User Name: 80001235@softx3000.huawei.com
l Password: iadtest2
l Associated POTS: 2 (binding port TEL2 on the ONT)
l Select Enable to enable the voice user configuration.
5. Click Apply to apply the configuration.
NOTE
l The parameters of the SIP-based voice user must be consistent with the corresponding configuration on the
softswitch.
l If Associated POTS is 1, port TEL1 on the ONT is bound. If Associated POTS is 2, port TEL2 on the ONT
is bound.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual 3 Configuration
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
222
To Next Page
Loading...
Need help?
General
