Step 4 Configure the voice protocol parameters.
Choose InternetGatewayDevice > Services > VoiceService > 1 > VoiceProfile > 1 from the
navigation tree. In the right pane, set the parameters as follows:
l Set SignalingProtocol to H248, indicating that the H.248 protocol is used.
l Set Region to CN, indicating the country code of China.
l Set X_HW_PortName to wan2, indicating that the new WAN interface 2 is bound.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual 3 Configuration
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
253
To Next Page
Loading...
Need help?
General
