Figure 5-16 WI-FI Basic Configuration
2. Click Apply to apply the configuration.
Table 5-4 describes the basic Wi-Fi parameters.
Table 5-4 Basic Wi-Fi parameters
Parameter
Description
Enable WLAN Indicates whether to enable the wireless network. The following
parameters can be set only when the wireless network is enabled.
SSID Indicates the name of the wireless network. It is used to
differentiate different wireless networks. It consists of a
maximum of 32 characters, without space or Tab character.A
default SSID1, named WirelessNet is created after the creation
of an ONT. The system can configure up to four SSIDs at a time
and cannot assign IP addresses to Wi-Fi terminals by SSID.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual 5 Web Page Reference
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
315