If You Want to... Then...
Place a conference on hold
l Placing a conference on hold: Press
Hold.
l Resuming a conference: Press Resume
to connect to a conference that was
placed on hold.
NOTE
l When the conference initiator presses Hold,
the conference is placed on hold.
l When a participant presses Hold, only the
participant is placed on hold.
End a conference 1. Press More to navigate to End and press
End.
The message "End the conference?" is
displayed.
2. Press Yes.
NOTE
l When the conference initiator presses End,
the conference is ended.
l When a participant presses End, only the
participant leaves the conference.
6.33 Intercom
The intercom function enables users within an enterprise to easily communicate with each
other.
NOTE
l In the EC6.X network environment, before using the intercom function, ensure that your account has
been assigned the intercom service rights and the intercom line type and peer number have been
configured on an idle line button of your phone.
l In the UC2.X network environment, the intercom function can be used only in the manager and
secretary scenario.
l In the IMS+UC network environment, before using the intercom function, ensure that your account
has been assigned the intercom service rights.
For any questions, consult your system administrator.
When the intercom function is configured, the corresponding line button is displayed as an
intercom button, and the intercom icon
is displayed.
NOTICE
The intercom function takes precedence over DND and call waiting, but call forward all takes
precedence over intercom.
eSpace 7910&7950 IP Phone
User Guide
6 Phone Usage
Issue 03 (2017-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
100
To Next Page
Loading...
