Huawei eSpace 7950 - Preferences

To Next Page

To Previous Page

NOTE

If the value for Sleep After is the same as the value for Adjustment Time, the phone automatically

changes to the sleep state at the appointed time.

----End

Disabling the Auto Brightness Function

You can perform the following steps to disable the auto brightness function:

Step 1 On the home screen, choose Apps > System > Power Saving > Auto Brightness.

The Auto Brightness screen is displayed.

Step 2 Select Auto Brightness and press Disable.

----End

Enabling the Screensaver Function

You can perform the following steps to enable the screensaver function:

Step 1 On the home screen, choose Apps > System > Power Saving > Screensaver.

The Screensaver screen is displayed.

Step 2 Press Enable.

The Delay field is displayed.

Step 3 Set a value and press Select.

----End

Disabling the Screensaver Function

You can perform the following steps to disable the screensaver function:

Step 1 On the home screen, choose Apps > System > Power Saving > Screensaver.

The Screensaver screen is displayed.

Step 2 Select Screensaver and press Disable.

----End

4.2.4 Wi-Fi (only for eSpace 7950 IP Phone)

eSpace 7950 supports the Wi-Fi function from V200R003C00SPCe00.

NOTE

Before using the Wi-Fi function, ensure that the USB port is enabled. For any questions, contact your

system administrator.

Enabling and Connecting Wi-Fi

Step 1 Connect the Wi-Fi Dongle to the USB port.

eSpace 7910&7950 IP Phone

User Guide

4 Phone Settings

Issue 03 (2017-06-30) Huawei Proprietary and Confidential

Other manuals for Huawei eSpace 7950