If You Want to... Then...
Split a conference 1. Select the profile picture of the
conference to split.
A confirmation dialog box is displayed.
2. Press OK.
Place a conference on hold
l Placing a conference on hold: Press
Hold.
NOTE
The hold operation does not take effect on the
merged conference (for example, Conference 1).
l Resuming a conference: Press Resume
to resume a conference in hold state.
End a conference 1. Press More to navigate to End and press
End.
The message "End the conference?" is
displayed.
2. Press OK.
NOTE
l When the initiator presses End, the
conference is ended.
l When a participant presses End, only the
participant leaves the conference.
7.6 Group Conference
NOTE
l Ensure that your login mode is account login and has been assigned the instant conference rights.
l Ensure that on the phone web page, you have enabled conference right and the instant conference
rights and set the conference type to Instant conference.
l For any questions, contact your system administrator.
You can perform the following operations to create a group conference:
Step 1 Press the Contacts button.
The Contacts screen is displayed.
Step 2 Press the Right arrow button to switch to the Groups screen.
Step 3 Select a group and press Conf.
The Participant List screen is displayed.
l Adding participants: Press Add.
l Deleting participants: Select a participant to delete, press More to navigate to Delete and
press Delete.
Step 4 Press Done.
The conference screen is displayed, on which you can see the security conference ID.
eSpace 7910&7950 IP Phone
User Guide
7 eSpace UC-Related Functions
Issue 03 (2017-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
127
To Next Page
Loading...
