Huawei eSpace 7950 - Absence Service

6.31 Absence Service
When you are unable to answer a call, you can enable the absence service. Then, the calling
party hears an announcement indicating that you are not at the desk.
NOTE
Before using the absence service function, ensure that your account has been assigned the absence
service rights. For any questions, contact your system administrator.
Press Absent on the home screen to enable the absence service. The message Absence
service enabled is then displayed, and is also displayed in the status bar.
Press Absent again to disable the absence service.
NOTE
You can set your status to to disable the absence service.
6.32 Local Conference
6.32.1 Creating a Local Conference
NOTE
Before using the local conference function, ensure that at least two lines have been configured for the
account, and conference right has been enabled on Web.
You can create a local conference using Join or Call Merge. For detailed operations, see
Table 6-10.
Table 6-10 Creating a local conference
If You Want to...
Then...
Create a local conference using Join 1. Press Conf to hold an ongoing call.
Then, you can hear the dial tone.
2. Enter the number of user C.
NOTE
You can press Contact to select a contact in
your contact list, or press History to select a
contact in the call history.
3. Press Call.
4. When user C answers the call, you can
talk with user C. Then, press Join to
create a local conference.
Create a local conference using Call Merge Press Merge to create a local conference,
when the call between you and user B is
ongoing and the call between you and user
C is placed on hold.
eSpace 7910&7950 IP Phone
User Guide
6 Phone Usage
Issue 03 (2017-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
98