Step 1 Press More to navigate to Record.
Step 2 Press Record.
The phone starts recording.
Step 3 Press Stop. The phone stops recording.
----End
Recording During a Conference
During a conference, you can perform the following steps to record the conference:
Step 1 Press More to navigate to Record.
Step 2 Press Record. The phone starts recording.
Step 3 Press Stop. The phone stops recording.
----End
6.5 Placing Calls
6.5.1 Placing Calls by Directly Entering Numbers
You can perform the following steps to place calls by directly entering numbers.
Step 1 Pick up the phone.
The dialing screen is displayed and the dial tone is played. The line button LED is steady
green.
NOTE
You can also enter the dialing screen by pressing the Speaker button, Headset button, or line button of
the account.
Step 2 Enter the number of a contact, or press the Up or Down arrow button to select a number in the
existing numbers.
Step 3 Press Call.
NOTE
l You can enter a number and then pick up the phone or press the Call softkey, Speaker button, or
Headset button to place a call to this number.
l When you enter the number of a contact, the phone automatically queries and displays the contact.
l After a contact is selected, you can press Edit Dial to change the number of the contact.
l If the plus sign (+) is required when you enter a number, press the * key twice.
----End
eSpace 7910&7950 IP Phone
User Guide
6 Phone Usage
Issue 03 (2017-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
65
To Next Page
Loading...
