Using Voicemail
When the phone has unread voice messages, the number of unread voice messages is
displayed on the Message icon on the home screen and the MWI LED blinks every 3 seconds.
NOTE
This function involves personal data. When using this function, comply with local laws and regulations,
and take sufficient measures to protect personal data.
l EC6.X or UC2.X network environment
Table 6-14 Using voicemail
If You Want to...
Then...
Query voice messages Press the Message button. The Voicemail screen is
displayed.
NOTE
On the home screen, you can select Message and press OK to
access the Voicemail screen.
You can query the number of unread voice messages and the
number of total voice messages for different accounts of
your phone.
Listen to voice messages Select a voice message and press Call.
Listen to the voice message as prompted.
NOTE
If only one account is configured, press the Message button or select Message on the home screen and
press OK to listen to voice messages.
l IMS+UC network environment
Table 6-15 Using voicemail
If You Want to...
Then...
Query voice messages Press the Message button. The Voicemail screen is
displayed.
NOTE
On the home screen, you can select Message and press OK to
access the Voicemail screen.
You can query the voice message information, such as the
calling number, time when a voice message was left, and
number of messages, for different accounts of your phone.
NOTE
The phone supports a maximum of 256 voice messages, and you
can query the information about a maximum of 40 voice messages
at a time.
eSpace 7910&7950 IP Phone
User Guide
6 Phone Usage
Issue 03 (2017-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
108
To Next Page
Loading...
