Table 7-3 Instant conference
If You Want to... Then...
Add a participant 1. Press Add on the conference screen.
2. Enter the number of a contact.
NOTE
l You can also press Contact to access
your contact list or press History to
access your call history and select a
number.
l If you are the conference initiator, you
can add a participant using the long
number (a phone number that includes
the country code and area code) or short
number (a local phone number).
3. Press Add.
The Participant List screen is
displayed.
l Adding participants: Press Add.
l Deleting participants: Select a
participant to delete, press More to
navigate to Delete and press Delete.
4. Press Done
NOTE
l In the IMS+UC network environment, an IP
phone supports a maximum of six instant
conferences, with each conference allowing a
maximum of 20 participants. If there are
more than 20 contacts in the participant list,
only the first 20 contacts (including yourself)
can join the conference.
l In the EC6.X or UC2.X network
environment, an IP phone supports one
instant conference, you can add a maximum
of 10 participants at a time. In total, you can
add 20 participants (including yourself).
l Select a participant, and press Other Tel to
change the invitation number.
Mute a participant
1. Press the arrow buttons to select a
participant to mute.
2. Press Mute.
NOTE
You can press Unmute to unmute the participant.
Mute yourself
l Turning mute on: Press the Mute button
during a call. is then displayed on
the status bar of your phone.
l Turning mute off: Press the Mute button
if your phone is muted.
eSpace 7910&7950 IP Phone
User Guide
7 eSpace UC-Related Functions
Issue 03 (2017-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
125
To Next Page
Loading...
