LED Description
Programmable button LED or line button
LED when the programmable button or line
button is set as the Speed Dial button and
the Busy Lamp Field (BLF) function is
enabled (For details about how to enable the
BLF function, see 4.1.6 Buttons.)
LED status (for EC6.X and UC2.X):
l When the monitored account is in
offhook, dialing, or idle state, the LED is
steady green.
l When the monitored account is in
talking state, the LED is steady red.
l When the monitored account is in
ringing or calling state, the LED blinks
red.
l When the monitored account is offline,
the LED is off.
LED status (for IMS+UC):
l When the monitored account is in
offhook, dialing, or idle state, the LED is
steady green.
l When the monitored account is in
ringing or talking state, the LED is
steady red.
l When the monitored account is away, the
LED is steady yellow.
l When the monitored account is offline,
the LED is off.
NOTE
The functions and status vary depending on the
network environment of your IP phone. For any
questions, contact your system administrator.
Programmable button LED or line button
LED when the programmable button or line
button is set as the Speed Dial button and
the BLF function is disabled (For details
about how to disable the BLF function, see
4.1.6 Buttons.)
When the phone is in speed dial or talking
state, the LED is steady red.
Line button LED (The line is shared by the
manager and secretary.)
l When there is an incoming call on the
shared line, the LED blinks red every
second.
l When the shared line is in talking state,
the LED is steady red.
l When call hold is actively enabled on the
shared line, the LED blinks red every 3
seconds.
Programmable button LED or line button
LED when the programmable button or line
button is set as the Call Forward button
When the call forward function is enabled
on the phone, the LED is steady green.
eSpace 7910&7950 IP Phone
User Guide
3 IP Phone Overview
Issue 03 (2017-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
To Next Page
Loading...
