NOTE
l Before enabling the call transfer service for an account, ensure that at least two lines have been
configured for the account.
l If the call transfer fails, you can press Resume to resume your call.
Blind Transfer
Step 1 Press Transfer during a call.
The call is placed on hold.
Step 2 Enter or select a number.
l Enter the number of a third party, press More to navigate to Done, and press Done.
l Press the Up arrow or Down arrow button to select a contact, press Contact to select a
contact in the contact list, or press History to select a contact in the call history, and
press Done.
NOTE
Before the third party answers the call you have transferred in blind mode, you can also perform the
blind transfer operation on a call carried over another line.
----End
Semi-Consult Transfer
Step 1 Press Transfer during a call.
The call is placed on hold.
Step 2 Enter the number of a third party, press the Up or Down arrow button to select a contact, press
Contact to select a contact in the contact list, or press History to select a contact in the call
history.
Step 3 Press Call.
Step 4 When hearing the ring back tone, press Done.
NOTE
In the EC6.X or UC2.X network environment, after you enter a number or select a contact, the call is
transferred upon on-hook.
----End
Consult Transfer
Step 1 Press Transfer during a call.
The call is placed on hold.
Step 2 Enter the number of a third party, press the Up or Down arrow button to select a contact, press
Contact to select a contact in the contact list, or press History to select a contact in the call
history.
Step 3 Press Call.
After the third party answers the call, ask him or her whether to answer the call.
eSpace 7910&7950 IP Phone
User Guide
6 Phone Usage
Issue 03 (2017-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
82
To Next Page
Loading...
