Huawei FusionModule500 Manual

FusionModule500 Smart Mini Data Center
Product Description (ECC800e)
3 System Architecture
Issue 01 (2017-04-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
56
Default Button
Table 3-39 Default button description
Name
Definition
Function
Default button
Hold down the button
for more than 10
seconds.
Reset to the default IP address
(192.168.0.10)
3.4.7.2 BIM
The BIM is a battery monitoring module that monitors the voltages, internal resistances, and
pole temperatures of batteries and supports 12 V power.
Features

Monitors the voltages, internal resistances, and pole temperatures of batteries.

Supports the hibernation function. (When it detects that the battery voltage is low, it will
enter the low-power mode.)

Communicates with the CIM in wireless mode.
Appearance
Figure 3-27 BIM
Indicators
Table 3-40 Indicator description
Indicator
Color
Silk
Screen
Status
Description
Running
Green
RUN
Off
Power consumption is low or the
BIM is not powered on.
Blinking at
super short
The networking has started but not
completed.

Huawei FusionModule500 Specifications

General

Brand	Huawei
Model	FusionModule500
Category	Storage
Language	English