Activity Indicator
(Green)
Fault Indicator
(Yellow)
Description
Blinking O The drive is being accessed.
NOTE
The blinking speed indicates the number of
I/Os.
Steady on O The drive is online.
O Blinking at 8 Hz The drive is faulty.
Blinking (on for
0.5s and o for
1s)
Blinking (on for
0.5s and o for
1s)
The drive is in prefail state.
Blinking (on for
3s and o for 3s)
Blinking (on for
3s and o for 3s)
The RAID group rebuilding is
suspended.
O O The drive is not in position.
SAS/SATA Drive Indicators
Figure 5-16 SAS/SATA drive indicators
Table 5-10 Description of SAS/SATA drive indicators
Activity Indicator
(Green)
Fault Indicator
(Yellow)
Description
Steady on O The drive is in position.
Blinking at 4 Hz O Data is being read or written normally,
or data on the primary drive is being
rebuilt.
Steady on Blinking at 1 Hz The drive is being located.
Blinking at 1 Hz Blinking at 1 Hz The data on the secondary drive is
being rebuilt.
O Steady on A member drive in the RAID array is
removed.
Huawei FusionServer Pro 2298 V5 Server
Technical White Paper 5 Hardware Description
Issue 05 (2020-09-03) Copyright © Huawei Technologies Co., Ltd. 29
To Next Page
Loading...
