Procedure
Step 1 Connect the KVM to the MM910.
1. Connect the mouse and keyboard to the two USB ports on the MM910.
2. Use a VGA cable to connect the KVM monitor to the VGA port on the MM910.
The main screen of the KVM is displayed.
Figure 12-11 Main screen of the KVM
Step 2 Connect to a compute node or a switch module over SOL.
1. Press CTRL+S on the KVM home page.
The following information is displayed:
*=====================================================================*
* Welcome to SMM SOL Server *
* Please log in with SMM account and password. *
*=====================================================================*
user name:
NOTE
You can press Ctrl+Shift+Alt to return to the previous screen or press CTRL+R to return to the
KVM main screen.
2. Type the MM910 user name and password, and press Enter.
The following information is displayed:
FusionServer Pro CH121 V5 Compute Node
User Guide
12 Common Operations
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 150
To Next Page
Loading...
