Step 2 On the PC, double-click PuTTY.exe.
The PuTTY Configuration window is displayed.
Step 3 In the navigation tree, choose Connection > SSH.
Step 4 Set the login parameters.
The parameters are described as follows:
l Host Name (or IP address): Enter the IP address of the server to be accessed, for
example, 191.100.34.32.
l Port: Retain the default value 22.
l Connection type: Retain the default value SSH.
Step 5 In the navigation tree, choose Session.
Step 6 Select SSH under Connection type.
Figure 12-25 PuTTY Configuration
Step 7 Set Close window on exit to Only on clean exit.
NOTE
Set Saved Sessions and click Save. You can double-click the saved record in Saved Sessions to log in to
the server next time.
Step 8 Click Open.
FusionServer Pro CH121 V5 Compute Node
User Guide
12 Common Operations
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 162
To Next Page
Loading...
