NOTE
l The drive letters vary with the storage media (HDD, SSD, and USB flash drive). Ensure that the
drive letter that you entered is correct.
l This operation takes time.
l If the command fails to execute, contact technical support.
Step 6 Remove the drive.
NOTE
After the data is cleared, do not restart or reinstall the server. Otherwise, the system will reload data to
the drives during the startup of the server.
----End
FusionServer Pro CH121 V5 Compute Node
User Guide
12 Common Operations
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 166
To Next Page
Loading...
