Step 5 Remove the air duct.
For details, see 3.7 Removing the Air Ducts.
Step 6 Remove the PCIe card front panel.
For details, see 3.9 Removing the PCIe Card Panel.
Step 7 Take the spare part out of its ESD bag.
Step 8 Determine the position of the PCIe card.
Figure 3-19 Position of the PCIe card
Step 9 Install the PCIe card.
1. Slide the PCIe card into the PCIe card bracket as far as it will go and ensure that the edge
of the PCIe card is flush with the PCIe card bracket. See (1) in Figure 3-20.
2. Install the PCIe card bracket. Ensure that the PCIe card connectors align with the
connectors on the mainboard and the screw holes on the PCIe card filler panel align with
the screw holes on the front panel. See (2) in Figure 3-20.
3. Tighten the three screws to secure the PCIe card bracket. See (3) in Figure 3-20.
FusionServer Pro CH121 V5 Compute Node
User Guide
3 Basic Operations
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 44
To Next Page
Loading...
