l Save an image: T
ouch the screen and select
to save the image to Gallery. Your phone
will return to the mirror once the image has been saved.
l Zoom in: Double touch the screen to zoom in. Double touch again to revert to the original
screen.
l Increase the brightness: When you blow on the microphone, the mirror will display a
"steamed up" ef
fect. Wipe the screen to remove this effect.
Using your device as a remote control
Your phone features an infra-red sensor that can be used as a remote control for various
household appliances such as TVs, set-top boxes, air conditioning units and DVD players.
Touch > Help in the list of remote controls for information on how to use the remote
control feature.
Adding a remote control
Y
our device comes with a large number of preprogrammed remote controls for different
appliance manufacturers.
1 Open
Smart Controller.
2 T
ouch
.
3 Select the appliance type.
4 Select the appliance manufacturer from the list. Follow the onscreen instructions to calibrate
the remote control. Point the remote control at the appliance and test the key buttons (such
as the power button).
5 If the appliance responds correctly
, touch Yes and then test another button. Once you have
finished testing, touch OK.
If the appliance does not respond to a button, touch and then touch the
corresponding button. Follow the onscreen instructions to configure the button.
Customising a remote control
If your appliance is not listed, you can configure a remote control manually
.
This feature is not supported for air conditioning units.
1 Open Smart Controller.
2 T
ouch
> Customise.
3 Swipe left or right on the screen to select a remote control template (for example, a TV or set-
top box).
4 T
ouch the button that you want to configure.
Tools
128
To Next Page
Loading...
Need help?
General
Weight and Dimensions
