Huawei Quidway S3000-EI Series - Chapter 3 Command Line Interface; 3.1 Command Line Interface; 3.2 Command Line View

Installation Manual
Quidway S3000-EI Series Ethernet Switches
Chapter 1 Product Introduction
1-11
II. Fixed 100M Ethernet port on the front panel
Table 1-12 Attributes of the fixed 100M Ethernet port of S3026E F Switch
Attribute S3026E FM S3026E FS
Connector LC
Interface number 12
Operating mode
100M
Full duplex
Transmission
medium and
maximum
transmission distance
62.5/125µm Multi-mode optical fiber
with a maximum transmission
distance of 2km.
9/125µm Single Mode optical fiber with a
maximum transmission distance of 15km.
III. Console port
S3026E F Switch provides a Console port compliant with EIA/TIA-232 asynchronous
serial criterion. Users can perform local or remote configuration of the switches via
this port.
Table 1-13 Console port attributes
Attribute Description
Connector RJ-45
Standard of
interface
Asynchronous EI_A/TIA-232
Baud rate 9600bps (by default)
Services supported

Connect with character terminal

Connect with the serial port of a local terminal (which can be a PC) or a remote
terminal (through a pair of Modems) and run terminal emulation program on a
terminal.
1.5.2 Optional Modules Supported by Front Panel
 6-port 100Base-FX Multi-mode module
 6-port 100Base-FX Single Mode module
 6-Port 10Base-T/100Base-TX Module
1.5.3 Rear Panel
I. S3026E FM and S3026E FS Switches Rear Panel
 Rear panel layouts
You can find AC socket, grounding screw, and redundant power socket on the rear
panel of S3026E FM and S3026E FS Switches. See the figure below.