Installation Manual
Quidway S3000-EI Series Ethernet Switches
Chapter 7 Optional Interface Modules
7-12
Figure 7-14 6-port 100Base-FX Single Mode module panel
The descriptions of panel indicators are as follows:
Table 7-16 Meanings of indicators of 6-port 100Base-FX Single Mode/Multi-mode module on the panel
Indicator Status description
LINK Off means that the line is disconnected. On means the line is connected.
ACTIVE
Off means that no data is being received or sent. Blinking means data is being received or sent.
7.8.2 Module Interface Fiber
6-port 100Base-FX Single Mode/Multi-mode module interfaces operate in 100M
full-duplex mode. The following table describes the interface attributes.
Table 7-17 6-port 100Base-FX Multi-mode/Single Mode module interface attributes
Description
Attribute
6-port 100Base-FX Single Mode
module
6-port 100Base-FX Multi-mode module
Connector
LC
Interface number
6
Operating mode
100M
Full duplex
Transmission medium
and maximum
transmission distance
9/125µm Single Mode optical fiber
15km.
62.15/125µm Multi-mode optical fiber with a
maximum transmission distance of 2km.
To Next Page
Loading...
