Huawei Quidway S3526 - System Features of S3526 Switch

Installation Manual
Quidway S3526 Ethernet Switch Chapter 2 Specifications and Features
2-5
2.4 System Features of S3526 Switch
Table 2-4 System features of S3526 switch
Item S3526 switch
Processor MPC8240 200MHz
BOOT ROM 512KB
SDRAM 64MB(default)
Flash 8MB
Size (W x H x D) 436mm x 42mm x 338mm
Weight 4kg
AC:
Rated voltage: 100 - 240V ; 50/60Hz
Maximum voltage:90-264V.;50/60Hz
Input voltage
DC:
Rated voltage: -60- -48V
Maximum voltage:-72- -36V
Max. power 40W
Fixed port: twenty-four 10Base-T/100Base-TX ports
Port
Two interface module slots. The types of optional interface modules include:

1000Base-T module

1000Base-LX module

1000Base-SX module

1000Base-ZX module (70km)

1000Base-LX GL module (40km)

stack module
Switching mode Store and forward
Switching capacity 12.8Gbps
Packet processing
capability
6.55Mpps
MAC address aging time 5 minutes (default)
VLAN Supports 4k port-based VLANs compliant with IEEE 802.1Q standard
MAC address list Supports up to 16K MAC addresses and 16K IP addresses
Buffer size 4MB
Flow Control

Supports IEEE 802.3x flow control (full duplex)

Back-pressure based flow control ( half-duplex)
Operating temperature 0°C to 45°C
Operating humidity
(non-condensing)
10% to 90%
 Note:
For the related descriptions and the implementation of the service features of S3526 Switch, please refer
to Quidway S3500 Series Ethernet Switches Operation Manual