Huawei Quidway S3526 - Connection of Module Interface Cable

Installation Manual
Quidway S3526 Ethernet Switch Chapter 8 Optional Interface Modules
8-10
8.7.4 Connection of Module Interface Cable
I. Interface cable for stack module
The interface cable for stack module is a type of dedicated cable, which is one meter
long.
Figure 8-10 Stack cable
 Note:
The stack cable supports hot swapping.
II. Connection of stack cable
Step 1: Insert the stack cable into the stack ports of the two switches to be stacked.
Step 2: Check the link indicator on the stack modules of the switch. If the indicator is on,
it indicates that the connection is correct.