Huawei RTN XMC ODU V200 - Installing the ODU on the ODU Separate Mounting Bracket; Installing the Hybrid Coupler on the ODU Separate Mounting Bracket

21 21
④
①
③
②
Installing the ODU on the ODU Separate Mounting Bracket
1. Install hybrid coupler ① on the transfer component ② and then tighten the four screws ③
2. Clamp transfer component ② which is installed with a hybrid coupler to main fixture ④ by sliding dog ears
downward into fixer. If you hear a click , it indicates that the transfer component is fixed securely.
Installing the Hybrid Coupler on the ODU Separate Mounting Bracket
Installing the ODU
You can loosen the screw
on the mounting slot to
remove the transfer
component.
1. Install ODU ① on transfer component ② and then tighten the four screws ③.
2. Attach the transfer component which is installed with an ODU to main fixture ④. If you hear a click, it indicates
that the transfer component is fixed securely.
②
①
③
④