45
Parts Replacement
Replacing the ODU
Replacing the ODU on the antenna
1. Loosen the four M6 captive screws of the ODU cornerwise.
2. Remove the ODU.
3. For details about the installation procedure of the ODU, see page 15.
Replacing the Hybrid coupler
Replacing the Hybrid coupler on the Antenna
1. Remove the ODU on the hybrid coupler. For details, see Replacing the ODU on the antenna on page 45.
2. Loosen the four M6 captive screws of the hybrid coupler cornerwise.
3. Remove the hybrid coupler.
4. For details about the installation of the hybrid coupler, see page 17.
Here describes the method for replacing the hybrid
coupler on the antenna, which is similar to the
methods for replacing the hybrid coupler on other
components.
Here describes the method for replacing the ODU on
the antenna, which is similar to the methods for
replacing the ODU on other components.
To Next Page
Loading...
