Huawei RTN XMC ODU V200 - Installing the Surge Protector and Its PGND Cable (Optional)

Fix the grounding cable of the surge protector
and the PGND cable of the ODU to the grounding
screw of the ODU.
Install the PGND cable of the surge protector to the "Surge"
end of the surge protector and fasten it by using a nut and a
spring washer.
If the surge protector cannot be directly connected to the IF
interface on the ODU due to the structural restriction of the
antenna installation parts, attach a matching angle type-N
adapter.
PGND Cable of the ODU
The grounding cable of
the surge protector
Installing the Surge Protector and Its PGND Cable (Optional)
This operation is required only when the site needs to be configured with the surge protector.
Installing ODU Cables
Installing the Surge Protector and Its PGND Cable (NA)
This operation is required only when the site needs to be configured with the surge protector.
40
If the surge protector cannot be directly connected to the IF interface
on the ODU due to the structural restriction of the antenna installation
parts, attach a matching angle type-N adapter.
Install the PGND cable of the surge protector to the "Surge"
end of the surge protector and fasten it by using a nut and a
spring washer.
PGND Cable of the ODU
The grounding
cable of the
surge protector
The PGND cable of the ODU to the grounding
screw of the ODU.