47
1. Stripping off the cable sheath
2. Gliding the lock nut and clamp 1 over the
cable
3. Folding back the braided shield to cover clamp 1,
and binding the braided shield by using clamp 2
4. Stripping off the dielectric insulating layer
5. Installing the body of the connector
Terminating the IF Cable with the TNC Connectors
16 mm
(0.63 inch)
Lock nut
Clamp 1
Clamp 2
Cutting off the redundant
part of the shielding layer
6 mm
(0.24 inch)
0.5 mm
(0.02 inch)
Filing the core wire head
into an arc shape
Body of the connector
Rotating to tighten
the lock nut
Fixing the connector
15 N·m
(132.76 lbf.in.)
Appendix
To Next Page
Loading...
