EasyManua.ls Logo

Huawei S6700 Series

Huawei S6700 Series
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[SwitchA-ospf-1] quit
# Configure Switch B.
[SwitchB] router id 2.2.2.2
[SwitchB] ospf
[SwitchB-ospf-1] area 0
[SwitchB-ospf-1-area-0.0.0.0] network 192.168.0.0 0.0.0.255
[SwitchB-ospf-1-area-0.0.0.0] quit
[SwitchB-ospf-1] area 2
[SwitchB-ospf-1-area-0.0.0.2] network 192.168.2.0 0.0.0.255
[SwitchB-ospf-1-area-0.0.0.2] quit
[SwitchB-ospf-1] quit
# Configure Switch C.
[SwitchC] router id 3.3.3.3
[SwitchC] ospf
[SwitchC-ospf-1] area 1
[SwitchC-ospf-1-area-0.0.0.1] network 192.168.1.0 0.0.0.255
[SwitchC-ospf-1-area-0.0.0.1] network 172.16.1.0 0.0.0.255
[SwitchC-ospf-1-area-0.0.0.1] quit
[SwitchC-ospf-1] quit
# Configure Switch D.
[SwitchD] router id 4.4.4.4
[SwitchD] ospf
[SwitchD-ospf-1] area 2
[SwitchD-ospf-1-area-0.0.0.2] network 192.168.2.0 0.0.0.255
[SwitchD-ospf-1-area-0.0.0.2] network 172.17.1.0 0.0.0.255
[SwitchD-ospf-1-area-0.0.0.2] quit
[SwitchD-ospf-1] quit
# Configure Switch E.
[SwitchE] router id 5.5.5.5
[SwitchE] ospf
[SwitchE-ospf-1] area 1
[SwitchE-ospf-1-area-0.0.0.1] network 172.16.1.0 0.0.0.255
[SwitchE-ospf-1-area-0.0.0.1] quit
[SwitchE-ospf-1] quit
# Configure Switch F.
[SwitchF] router id 6.6.6.6
[SwitchF] ospf
[SwitchF-ospf-1] area 2
[SwitchF-ospf-1-area-0.0.0.2] network 172.17.1.0 0.0.0.255
[SwitchF-ospf-1-area-0.0.0.2] quit
[SwitchF-ospf-1] quit
4. Verify the configuration.
# Check OSPF neighbors of Switch A.
[SwitchA] display ospf peer
OSPF Process 1 with Router ID 1.1.1.1
Neighbors
Area 0.0.0.0 interface 192.168.0.1(Vlanif10)'s neighbors
Router ID: 2.2.2.2 Address: 192.168.0.2 GR State: Normal
State: Full Mode:Nbr is Master Priority: 1
DR: 192.168.0.1 BDR: 192.168.0.2 MTU: 0
Dead timer due in 36 sec
Neighbor is up for 00:15:04
Authentication Sequence: [ 0 ]
Neighbors
Area 0.0.0.1 interface 192.168.1.1(Vlanif20)'s neighbors
Router ID: 3.3.3.3 Address: 192.168.1.2 GR State: Normal
State: Full Mode:Nbr is Master Priority: 1
DR: 192.168.1.1 BDR: 192.168.1.2 MTU: 0
Dead timer due in 39 sec
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 4 OSPF Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
138

Table of Contents

Other manuals for Huawei S6700 Series

Related product manuals