EasyManua.ls Logo

Huawei S6700 Series

Huawei S6700 Series
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Procedure
l Set an interval at which CSNPs are sent.
1. Run:
system-view
The system view is displayed.
2. Run:
interface interface-type interface-number
The interface view is displayed.
3. Run:
isis timer csnp csnp-interval [ level-1 | level-2 ]
The interval at which CSNPs are sent is set on the specified interface.
NOTE
Configure Level-1 and Level-2 only when a broadcast interface is specified.
l Configure the intelligent timer controlling LSP generation.
1. Run:
system-view
The system view is displayed.
2. Run:
isis [ process-id ]
The IS-IS view is displayed.
3. Run:
timer lsp-generation max-interval [ init-interval [ incr-interval ] ]
[ level-1 | level-2 ]
The intelligent timer controlling LSP generation is configured.
If a level is not specified, both level-1 and level-2 are used by default.
The delay in generating an LSP or an LSP fragment for the first time is determined
by init-interval; the delay in generating an LSP or an LSP fragment for the second
time is determined by incr-interval. From the third time on, the delay in generating
an LSP increases twice every time until the delay reaches the value specified by max-
interval. After the delay remains at the value specified by max-interval for three times
or the IS-IS process is restarted, the delay decreases to the value specified by init-
interval.
If incr-interval is not specified, the delay in generating an LSP or LSP fragment for
the first time is determined by init-interval. From the second time on, the delay in
generating an LSP is determined by max-interval. After the delay remains at the value
specified by max-interval for three times or the IS-IS process is restarted, the delay
decreases to the value specified by init-interval.
When only max-interval is specified, the intelligent timer functions as an ordinary
one-time triggering timer.
l Set the maximum length for LSPs.
1. Run:
system-view
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 6 IS-IS Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
274

Table of Contents

Other manuals for Huawei S6700 Series

Related product manuals