EasyManua.ls Logo

Huawei S6700 Series - Page 368

Huawei S6700 Series
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The configurations of SwitchB and SwitchC are similar to the configuration of SwitchA, and
are not mentioned here.
Step 3 Configure the basic IS-IS functions.
# Configure Switch A.
[SwitchA] isis
[SwitchA-isis-1] is-level level-2
[SwitchA-isis-1] network-entity 10.0000.0000.0001.00
[SwitchA-isis-1] quit
[SwitchA] interface vlanif 10
[SwitchA-Vlanif10] isis enable 1
[SwitchA-Vlanif10] quit
[SwitchA] interface vlanif 20
[SwitchA-Vlanif20] isis enable 1
[SwitchA-Vlanif20] quit
# Configure Switch B.
[SwitchB] isis
[SwitchB-isis-1] is-level level-2
[SwitchB-isis-1] network-entity 10.0000.0000.0002.00
[SwitchB-isis-1] quit
[SwitchB] interface vlanif 50
[SwitchB-Vlanif50] isis enable 1
[SwitchB-Vlanif50] quit
[SwitchB] interface vlanif 20
[SwitchB-Vlanif20] isis enable 1
[SwitchB-Vlanif20] quit
[SwitchB] interface vlanif 40
[SwitchB-Vlanif40] isis enable 1
[SwitchB-Vlanif40] quit
# Configure Switch C.
[SwitchC] isis
[SwitchC-isis-1] is-level level-2
[SwitchC-isis-1] network-entity 10.0000.0000.0003.00
[SwitchC-isis-1] quit
[SwitchC] interface vlanif 10
[SwitchC-Vlanif10] isis enable 1
[SwitchC-Vlanif10] quit
[SwitchC] interface vlanif 50
[SwitchC-Vlanif50] isis enable 1
[SwitchC-Vlanif50] quit
# After the preceding configurations are complete, use the display isis peer command. You can
view that the neighboring relationship is set up between Switch A and Switch B, and that between
Switch A and Switch C. Take the configuration on Switch A as an example:
[SwitchA] display isis peer
Peer information for ISIS(1)
----------------------------
System Id Interface Circuit Id State HoldTime Type PRI
0000.0000.0002 Vlanif20 0000.0000.0002.01 Up 9s L2 64
0000.0000.0003 Vlanif10 0000.0000.0001.02 Up 21s L2 64
Total Peer(s): 2
# The switches have learned routes of each other. Take the routing table of Switch A as an
example:
[SwitchA] display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 8 Routes : 9
Destination/Mask Proto Pre Cost Flags NextHop Interface
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 6 IS-IS Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
349

Table of Contents

Other manuals for Huawei S6700 Series

Related product manuals